Add a celestial coordinate conversion to an SlaMap astSlaAdd
When an SlaMap is first created (using astSlaMap), it simply performs a unit (null) Mapping. By using astSlaAdd (repeatedly if necessary), one or more coordinate conversion steps may then be added, which the SlaMap will perform in sequence. This allows multi-step conversions between a variety of celestial coordinate systems to be assembled out of the building blocks provided by SLALIB.
Normally, if an SlaMap’
s Invert attribute is zero (the default), then its forward
transformation is performed by carrying out each of the individual coordinate
conversions specified by astSlaAdd in the order given (i.e. with the most recently
added conversion applied last).
This order is reversed if the SlaMap’
s Invert attribute is non-zero (or if the inverse
transformation is requested by any other means) and each individual coordinate
conversion is also replaced by its own inverse. This process inverts the overall effect
of the SlaMap. In this case, the first conversion to be applied would be the
inverse of the one most recently added.
"
SLALIB Conversions"
section for details
of those available. "
args"
array. "
SLALIB Conversions"
section). This
array is ignored and a NULL pointer may be supplied if no arguments are needed. All coordinate values processed by an SlaMap are in radians. The first coordinate is the celestial longitude and the second coordinate is the celestial latitude.
When assembling a multi-stage conversion, it can sometimes be difficult to determine the most economical conversion path. For example, converting to the standard FK5 coordinate system as an intermediate stage is often sensible in formulating the problem, but may introduce unnecessary extra conversion steps. A solution to this is to include all the steps which are (logically) necessary, but then to use astSimplify to simplify the resulting SlaMap. The simplification process will eliminate any steps which turn out not to be needed.
This function does not check to ensure that the sequence of coordinate conversions added to an SlaMap is physically meaningful.
"
cvt"
parameter to
indicate which celestial coordinate conversion is to be added to the SlaMap. Each
string is derived from the name of the SLALIB routine that performs the conversion and
the relevant documentation (SUN/67) should be consulted for details. Where arguments
are needed by the conversion, they are listed in parentheses. Values for these
arguments should be given, via the "
args"
array, in the order indicated. The argument
names match the corresponding SLALIB routine arguments and their values should be
given using exactly the same units, time scale, calendar, etc. as described in
SUN/67:
"
ADDET"
(EQ): Add E-terms of aberration.
"
SUBET"
(EQ): Subtract E-terms of aberration.
"
PREBN"
(BEP0,BEP1): Apply Bessel-Newcomb pre-IAU 1976 (FK4) precession model.
"
PREC"
(EP0,EP1): Apply IAU 1975 (FK5) precession model.
"
FK45Z"
(BEPOCH): Convert FK4 to FK5 (no proper motion or parallax).
"
FK54Z"
(BEPOCH): Convert FK5 to FK4 (no proper motion or parallax).
"
AMP"
(DATE,EQ): Convert geocentric apparent to mean place.
"
MAP"
(EQ,DATE): Convert mean place to geocentric apparent.
"
ECLEQ"
(DATE): Convert ecliptic coordinates to FK5 J2000.0 equatorial.
"
EQECL"
(DATE): Convert equatorial FK5 J2000.0 to ecliptic coordinates.
"
GALEQ"
: Convert galactic coordinates to FK5 J2000.0 equatorial.
"
EQGAL"
: Convert FK5 J2000.0 equatorial to galactic coordinates.
"
HFK5Z"
(JEPOCH): Convert ICRS coordinates to FK5 J2000.0 equatorial.
"
FK5HZ"
(JEPOCH): Convert FK5 J2000.0 equatorial coordinates to ICRS.
"
GALSUP"
: Convert galactic to supergalactic coordinates.
"
SUPGAL"
: Convert supergalactic coordinates to galactic.
"
J2000H"
: Convert dynamical J2000.0 to ICRS.
"
HJ2000"
: Convert ICRS to dynamical J2000.0.
"
R2H"
(LAST): Convert RA to Hour Angle.
"
H2R"
(LAST): Convert Hour Angle to RA.
For example, to use the "
ADDET"
conversion, which takes a single argument EQ,
you should consult the documentation for the SLALIB routine SLA_ADDET. This
describes the conversion in detail and shows that EQ is the Besselian epoch of the
mean equator and equinox. This value should then be supplied to astSlaAdd in
args[0].
In addition the following strings may be supplied for more complex conversions which do
not correspond to any one single SLALIB routine (DIURAB is the magnitude of the diurnal
aberration vector in units of "
day/(2.PI)"
, DATE is the Modified Julian Date of the
observation, and (OBSX,OBSY,OBZ) are the Heliocentric-Aries-Ecliptic cartesian
coordinates, in metres, of the observer):
"
HPCEQ"
(DATE,OBSX,OBSY,OBSZ): Convert Helioprojective-Cartesian coordinates to
J2000.0 equatorial.
"
EQHPC"
(DATE,OBSX,OBSY,OBSZ): Convert J2000.0 equatorial coordinates to
Helioprojective-Cartesian.
"
HPREQ"
(DATE,OBSX,OBSY,OBSZ): Convert Helioprojective-Radial coordinates to J2000.0
equatorial.
"
EQHPR"
(DATE,OBSX,OBSY,OBSZ): Convert J2000.0 equatorial coordinates to
Helioprojective-Radial.
"
HEEQ"
(DATE): Convert helio-ecliptic coordinates to J2000.0 equatorial.
"
EQHE"
(DATE): Convert J2000.0 equatorial coordinates to helio-ecliptic.
"
H2E"
(LAT,DIRUAB): Convert horizon coordinates to equatorial.
"
E2H"
(LAT,DIURAB): Convert equatorial coordinates to horizon.
Note, the "
H2E"
and "
E2H"
conversions convert between topocentric horizon
coordinates (azimuth,elevation), and apparent local equatorial coordinates (hour
angle,declination). Thus, the effects of diurnal aberration are taken into
account in the conversions but the effects of atmospheric refraction are not.