The TRIPLOT command provides a flexible but straightfoward method for displaying polarization spectra. As mentioned in the previous section a triplot consists of three separate graphs. The top panel displays the position angle of the polarization in degrees, the middle section shows the percentage polarization and the bottom section shows the intensity spectrum. The first command parameter is the percentage error in polarization with which to bin the spectrum. If no further parameters are given the polarization spectrum in the current arrays will be plotted. Additional parameters refer to stack entries. If only one stack entry is specified then that polarization spectrum is plotted. If more than one stack entry are specified then they are all plotted, but on the axis limits of the first polarization spectrum specified. If don’t want the plotting surface erased before each triplot command is executed then use the NOBOX command. The BOX command negates this.
A polarized flux section may be included in the triplot using the PFLUX command. The NOPFLUX command negates this. The polarized flux section appears between the percentage flux and the position angle section.
In some cases, the polarization structure is more clearly seen in normalized Stokes and . The QUPANEL will tell the triplot command to produce a plot showing Stokes in the bottom panel and Stokes and Stokes in place of the usual position angle and percentage polarization.
The plotting limits may be altered by the user. For example, the wavelength range to be plotted is by default the first and last wavelength points of the polarization spectrum. The WRANGE command allows the user to specify a range and the CWRANGE allows the user to select a range from a previous triplot using the cursor. WAUTO switches back to the default wavelength range. IRANGE and IAUTO can be used to set the plotting range for the intensity section and TRANGE and TAUTO refer to the position angle plot. PRANGE and PAUTO change the percentage polarization plotting ranges. PFRANGE and PFAUTO perform similar functions on the polarized flux panel.
It is an truism of spectropolarimetry that the most interesting objects have a polarization with a position angle close to 0 or 180, resulting in a position angle plot that oscillates madly between the extremes of the plot because of wrap-around. In order to prevent this the triplot can be forced to plot position angles either higher than 180 (THI) or lower than 0 (TLOW). Simply set the range to (0,200) for example using TRANGE and invoke THI. The effects of THI or TLOW can be lifted using TFREE.
The type of line used to plot the spectrum can be changed for each plot using LROT and the colour of the line (for those of you lucky enough to have a colour terminal) can be rotated using CROT. You can select a specific line style or colour using the SETLINE or SETCOLOUR commands. If you wish to plot a join-the-dots spectrum then use the POLY command. The HIST command returns to histogram style plots. The data may be plotted as points with error bars using the MARK command.
The axis labels on the plot can be changed. XLABEL alters the (guess) label on the -axis and ILABEL changes the label on the intensity spectrum. The font used to annotate the axes may be changed using the FONT command.