Tabbing

  \begin{quote}
    \begin{tabbing}
      ROUTINExxx\=ERRxFMTBADxx\==x8xxxx\=\kill
      \textbf{ROUTINE}\>\textbf{SYMBOL}\>\>\textbf{MEANING}\\
      \\
      ADDSCR:\>ERR\_FRMNUL\>= 1\>Frame null.\\
      \>ERR\_FRMNAC\>= 3\>Frame could not be accessed.\\
      \>ERR\_PARINV\>= 4\>Parameter name invalid.\\
      \\
      CNPAR:\>ERR\_PARANC\>= 2\>Parameter association not cancelled.\\
      \>ERR\_PARINV\>= 4\>Parameter name invalid.\\
      \\
      CTOI:\>ERR\_INPINV\>= 5\>Input invalid.\\
      \\
      CTOR:\>ERR\_INPINV\>= 5\>Input invalid.\\
    \end{tabbing}
  \end{quote}

  ******************************************************************************

  \begin{tabbing}
    namexx\=positionxx\=maxdimsxx\=dimensxx\=pointerxx\=pointerxxx\=\kill
    \emph{name}\>\emph{default}\>\emph{maxels}\>\emph{value}\>\emph{actels}
      \>\>\textbf{RDKEYx}\\
    \emph{name}\>\>\>\emph{value}\>\emph{nels}\>\>\textbf{WRKEYx}\\
    \\
    \emph{name}\>\emph{dtype}\>\emph{ftype}\>\emph{size}\>\emph{pointer}
      \>\>\textbf{RDDATA, WRDATA}\\
    \emph{name}\>\emph{dtype}\>\>\emph{size}\>\emph{pointer}\>\>\textbf{GETDYN}\\
    \\
    \emph{name}\>\emph{dtype}\>\emph{maxdims}\>\emph{dimens}\>\emph{actdims}
      \>\emph{pointer}\>\textbf{RDIMAG}\\
    \emph{name}\>\emph{dtype}\>\>\emph{dimens}\>\emph{ndims}\>\emph{pointer}
      \>\textbf{WRIMAG}\\
  \end{tabbing}

ROUTINE

SYMBOL

MEANING

ADDSCR:

ERR_FRMNUL

= 1

Frame null.

ERR_FRMNAC

= 3

Frame could not be accessed.

ERR_PARINV

= 4

Parameter name invalid.

CNPAR:

ERR_PARANC

= 2

Parameter association not cancelled.

ERR_PARINV

= 4

Parameter name invalid.

CTOI:

ERR_INPINV

= 5

Input invalid.

CTOR:

ERR_INPINV

= 5

Input invalid.

  The following qualifiers are recognized:

  \begin{list}{}{\settowidth{\labelwidth}{\texttt{-f}\emph{filename}}
    \setlength{\leftmargin}{\labelwidth}
    \addtolength{\labelwidth}{\labelsep}}
    \item[\texttt{-b}] Process pages in reverse order; this can be useful on the
    A2 model printers which stack their pages face up and therefore in the
    reverse of the order in which they were printed.
    \item[\texttt{-c\#}]  Print \texttt{\#} copies of each page; a photocopier is
    cheaper so this qualifier shouldn’t really be needed.
    \item[\texttt{-x\#}\textit{unit}] Set the left margin to \texttt{\#} (which
    can be both a real number and negative); \textit{unit} is one of:

    \begin{tabular}{ll}
      bp &big point (1in = 72bp)\\
      cc &cicero (1cc = 12dd)\\
      cm &centimetre (1in = 2.54cm)\\
      dd &didot point (1157dd = 1238pt)\\
      in &inch\\
      mm &millimetre\\
      pc &pica (1pc = 12pt)\\
      pt &point (72.27pt = 1in)\\
      sp &scaled point (65536sp = 1pt)
    \end{tabular}

    The default margin is 1in.
    \item[\texttt{-y\#}\textit{unit}] Set top margin. The default is 1in.
  \end{list}

  ******************************************************************************

  \newlength{\numlen}
  \settowidth{\numlen}{xxxx000--000--0000}
  \settowidth{\labelsep}{000}

  \begin{list}{}{\setlength{\labelwidth}{\numlen}\setlength{\leftmargin}{\numlen}
    \addtolength{\leftmargin}{\labelsep}}
    \item[0385--41191] (RDC) V21, (use 8-bit no-parity), connected to
    Departmental Gandalf PACX.
    PACX service is \texttt{STARN}.
    More details if you specify \texttt{HELP} instead of \texttt{STARN} after
    the Gandalf prompt.
    \item[061--273--5730] (RDC) V21/V23 (autobaud), seven bits, even parity,
    connected to VAX--11/750.
    \item[0477--71324] (RDC) V21/V23/V22/V22bis (autobaud), connected to a DECserver
    200.
    \item[0235--831--593] (RDC) VAX 11/780, V22.
    \item[0235--44--6951] PAD line V21/V23.
    \item[0235--44--6952] PAD line V22/V22bis.
  \end{list}

bp	big point (1in = 72bp)
cc	cicero (1cc = 12dd)
cm	centimetre (1in = 2.54cm)
dd	didot point (1157dd = 1238pt)
in	inch
mm	millimetre
pc	pica (1pc = 12pt)
pt	point (72.27pt = 1in)
sp	scaled point (65536sp = 1pt)

8 Tabbing