SETBB

Sets a new value for the quality bad-bits mask of an NDF

Description:

This application sets a new value for the bad-bits mask  associated with the QUALITY  component of an NDF . This 8-bit mask is used to select which of the bits in the quality array should normally be used to generate ‘bad’  pixels when the NDF is accessed.

Wherever a bit is set to 1 in the bad-bits mask, the corresponding bit will be extracted from the NDF’s quality array value for each pixel (the other quality bits being ignored). A pixel is then considered ‘bad’ if any of the extracted quality bits is set to 1. Effectively, the bad-bits mask therefore allows selective activation of any of the eight 1-bit masks which can be stored in the quality array.

The bit mask can be given either numerically (in decimal, binary, octal or hexadecimal format), or as a set of quality names (see SETQUAL).

Usage:

setbb ndf bb

Parameters:

AND = _LOGICAL (Read)
By default, the value supplied via the BB parameter will be used literally as the new bad-bits mask value. However, if a TRUE value is given for the AND parameter, then a bit-wise ‘AND’ will first be performed with the old value of the mask. This facility allows individual bits in within the mask to be cleared (i.e. reset to zero) without affecting the current state of other bits (see the "Examples" section).

The AND parameter is not used if a TRUE value is given for the OR parameter. [FALSE]

BB = LITERAL (Read)
The new integer value for the bad-bits mask. This may either be specified in normal decimal notation, or may be given using binary, octal or hexadecimal notation by adding a "B", "O" or "Z" prefix (respectively) to the appropriate string of digits. The value supplied should lie in the range 0 to 255 decimal (or 8 bits of binary).

If the AND and OR parameters are both FALSE, then the value supplied will be used directly as the new mask value. However, if either of these logical parameters is set to TRUE, then an appropriate bit-wise ‘AND’ or ‘OR’ operation with the old mask value will first be performed.

It may also be specified as a comma-separated list of quality names.  A quality name is a symbolic name that identifies a specific quality bit (quality names can be defined using SETQUAL, and displayed using SHOWQUAL).

The default value suggested when prompting for this value is chosen so as to leave the original mask value unchanged.

NDF = NDF (Read and Write)
The NDF whose bad-bits mask is to be modified.
OR = _LOGICAL (Read)
By default, the value supplied via the BB parameter will be used literally as the new bad-bits mask value. However, if a TRUE value is given for the OR parameter, then a bit-wise ‘OR’ will first be performed with the old value of the mask. This facility allows individual bits in within the mask to be set to 1 without affecting the current state of other bits (see the "Examples" section). [FALSE]

Examples:

setbb myframe 3
Sets the bad-bits mask value for the QUALITY component of the NDF called myframe to the value 3. This means that bits 1 and 2 of the associated quality array will be used to generate bad pixels.
setbb myframe "SKY,BACK"
Sets the bad-bits mask value for the quality component of the NDF called myframe so that any pixel that is flagged with either of the two qualities "SKY" or "BACK" will be set bad. The NDF should contain information that associates each of these quality names with a specific bit in the quality array. Such information can for instance be created using the SETQUAL command.
setbb ndf=myframe bb=b11
This example performs the same operation as above, but in this case the new mask value has been specified using binary notation.
setbb xspec b10001000 or
Causes the bad-bits mask value in the NDF called xspec to undergo a bit-wise ‘OR’ operation with the binary value 10001000. This causes bits 4 and 8 to be set without changing the state of any other bits in the mask.
setbb quasar ze7 and
Causes the bad-bits mask value in the NDF called quasar to undergo a bit-wise ‘AND’ operation with the hexadecimal value E7 (binary 11100111). This causes bits 4 and 5 to be cleared (i.e. reset to zero) without changing the state of any other bits in the mask.

Notes:

The bad-bits value will be disregarded if the NDF supplied does not have a QUALITY component present. A warning message will be issued if this should occur.

Related Applications

KAPPA: QUALTOBAD, REMQUAL, SETQUAL, SHOWQUAL; FIGARO: Q2BAD.