H Keyword index

The index does not include Figaro applications as keywords. The index points either to a section or sub-section of SUN/86, or to a different Starlink document (SUN, SSN, SG, SGP). Where the index points to a section it may be intended to point to the sub-sections of that section as well, without making this explicit.

A

• @
  3.1: Parameters
  3.2: Internals of a data file
  G.1.6: Changes: Parameters and variables
• ADAM
  SG/4: ADAM — Starlink software environment
  SG/5: ICL — Interactive command language for ADAM
  SG/6: ADAM — Programmer’s facilities and documentation guide
  SUN/101: ADAM — Introduction to ADAM programming
  SUN/114: PAR — Interface to the ADAM parameter system
  SUN/115: ADAM — Interface module reference manual
  SUN/144: ADAM — Unix version
  SSN/45: ADAM — Release 2.1
  SSN/64: ADAM — Organization of Application Packages
• ADAM parameter system
  3.1: Parameters
  G.4: Figaro 3.2-3 news item
  SUN/114: PAR — Interface to the ADAM parameter system
  SUN/115: ADAM — Interface module reference manual
• ADAM_USER
  2.1: Unix setup
• AGI
  2.1: Unix setup
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.1.9: Changes: High-level subroutines
  G.5: Figaro 5.0 release
  SUN/48: AGI — Applications graphics interface
• AGI_USER
  2.1: Unix setup
  G.5: Figaro 5.0 release
• (A)PAR, see ADAM parameter system
• abbreviated parameter names
  3.1.2: Parameters: On the command line
• abort flag
  3.1.3: Parameters: Prompted
  G.1.6: Changes: Parameters and variables
  G.3: Figaro 3.2 news item
• absorption lines
  4.11: Abline command
  4.12: Gauss command
• accept
  2.5: Looking at an image
  3.1.3: Parameters: Prompted
• alink
  F.1: Programming
  G.1.2: Changes: General
• application: synonymous with command
• arc
  4.8: Wavelengths
  4.8.3: Wavelengths: The arc command
  4.8.4: Wavelengths: Applying an arc fit to other spectra
  4.10: Arc command
  4.13: Échelle reduction
• arc calibration: see also arc
  B.7: in Specdre
  C.3: in Twodspec
• arc line list: see arc
• asymmetry
  4.11: Abline command
• axis
  2.4: Looking at a spectrum
  3.2.2: Internals of a data file: NDF format
  3.2.5: Internals of a data file: DST format
  4.6: FFT
  4.8: Wavelengths
  4.11: Abline command
  4.13.10: Échelle reduction: Wavelength calibration
  A.6: Commands: Arthimetic
  A.18: Commands: Complex and FFT
  G.1.8: Changes: Old data access routines
  G.3: Figaro 3.2 news item
  G.5: Figaro 5.0 release

B

• BoundingBox
  2.7: Paper copies
• backslash
  3.1.3: Parameters: Prompted
  3.1.5: Parameters: Syntax conflicts
  G.1.8: Changes: Old data access routines
• bad value
  3.2.2: Files: NDF format
  3.2.5: Files: DST format
  A.12: Commands: Fudging
  G.1.3: Changes: Ported Applications
  G.1.8: Changes: Old data access routines
  G.1.11: Changes: Low-level subroutines
  G.5: Figaro 5.0 release
• batch mode
  4.11.2: Abline command: Running abline
  G.1: Changes
• bug report
  2.3.4: Getting help: Support

C

• C shell: see shell
• CHR
  SUN/40: CHR — Character handling routines
• CNF
  SGP/5: CNF — C and Fortran mixed programming
• CNV
  G.1.2: Changes: General
• CONVERT
  3.2.4: Internals of a data file: Foreign formats
  G.6: Figaro 5.1.3
  SGP/55: CONVERT — A format-conversion package
• Callable Figaro
  G.1.2: Changes: General
  G.1.5: Changes: Un-ported applications
• cabujy
  G.1.2: Changes: General
• centre of gravity
  4.10.5: Arc command: Moving about etc.
  4.11: Abline command
  A.9: Commands: Photometry
• centroid: see centre of gravity
• colour
  2.4: Looking at a spectrum
  2.5.1: Looking at an image: The image command
  2.5.3: Looking at an image: Adding colour
  2.6: Image display in monochrome
  A.3: Commands: Display
  G.1.2: Changes: General
  G.2: Figaro 3.1-1 news item
• colour lookup table
  2.5.1: Looking at an image: The image command
  2.5.3: Looking at an image: Adding colour
  2.6: Image display in monochrome
  G.1.2: Changes: General
  G.2: Figaro 3.1-1 news item
• command
  2.2: Starting Figaro
  2.3: Getting help
  A: Classified list of commands
  F.1: Programming
• command line interface
  2.2: Starting Figaro
  2.3: Getting help
  3.1: Parameters
• compifl
  F.1: Programming
  G.1.2: Changes: General
• complex data: see FFT
• continuum
  4.2: B stars
  4.5: Fluxing
  4.11: Abline command
  4.12: Gauss command
  4.13: Échelle reduction
  A.5: Commands: B stars
  A.7: Commands: Flats
  A.16: Commands: Fluxing
• crepar
  F.1: Programming
• cshrc
  2.1: Unix setup
• cube manipulation
  B.5: in Specdre
  C.8: in Twodspec

D

• DCL Figaro
  G.1: Changes
• DSA
  G.1.6: Changes: Parameters and variables
  G.1.8: Changes: Old data access routines
  G.3: Figaro 3.2 news item
  G.5: Figaro 5.0 release
  G.5.1: Figaro 5.0-1 news item
  G.6: Figaro 5.1.3 release
• DSK
  G.1.2: Changes: General
  G.1.5: Changes: Un-ported applications
• DST
  1: Introduction
  3.2: Internals of a data file
  G.1.3: Changes: Ported applications
  G.1.8: Changes: Old data access routines
  G.3: Figaro 3.2 news item
  G.6: Figaro 5.1.3 release
• DTA
  G.1.8: Changes: Old data access routines
  G.3: Figaro 3.2 news item
  G.5: Figaro 5.0 release
  G.6: Figaro 5.1.3 release
• DUT
  G.1.2: Changes: General
• DYN
  G.1.8: Changes: Old data access routines
• data array
  3.2: Internals of a data file
  4.6: FFT
• data file
  3.2: Internals of a data file
• data format
  1: Introduction
  3.2: Internals of a data file
  4.3: Filters
  4.4: Spiketra
  4.5.2: Fluxing: Standard files
  4.10.1: Arc command: Arc line lists
  4.12.4: Gauss: Format of data file
  A.1: Commands: Input
  A.2: Commands: Output
  G.1: Changes
  G.3: Figaro 3.2 news item
  G.4: Figaro 3.2-3 news item
  G.6: Figaro 5.1.3 release
  SUN/55: CONVERT — A format conversion package
  SSN/20: Adding format conversion facilities to the NDF data access library
• data section: see NDF section
• data type
  3.2.1: Internals of a data file: HDS files
  G.1.3: Changes: Ported applications
• display
  2.4: Looking at a spectrum
  2.5: Looking at an image
  2.6: Image display in monochrome
  A.3: Commands: Display
  G.1.2: Changes: General
  G.2: Figaro 3.1-1 news item
• dta2hds
  G.1.2: Changes: General
• dvips
  2.7: Paper copies
  SUN/9: LATEX — A document preparation system

E

• EMS
  G.1.2: Changes: General
  SUN/104: MSG and ERR — Message and Error Reporting Systems
  SSN/4: EMS — Error message service
• ERR: see EMS
• Echomop
  4.13: Échelle reduction
  SUN/152: ECHOMOP — Échelle data reduction package
• Encapsuated PostScript: see PostScript
• échelle
  4.13: Échelle reduction
  A.20: Commands: Échelle
  G.5: Figaro 5.0 release
  SUN/152: ECHOMOP — Échelle data reduction package
  SUN/53: ECHWIND — UCL échelle spectrograph observation planning program
  SSN/3: ECH — Échelle spectrograph model package
• emission lines
  4.11: Abline command
  4.12: Gauss command
  A.10: Commands: Line fits
• environment variables
  G.1: Changes
  G.1.2: Changes: General
• epsf_l, epsf_p, epsfcol_l, epsfcol_p
  2.7: Paper copies
• equivalent width
  4.11: Abline command
  4.12: Gauss command
• error (see also variance)
  3.3: Error propagation
  3.2.5: Internals of a data file: DST format
  4.12: Gauss command
  A.3: Commands: Display
  A.8: Commands: Manipulations
  A.23: Commands: Miscellany
  G.1.8: Changes: Old data access routines
• extinction
  4.9: Extinction
  A.17: Commands: Extinction

F

• F77 G.1.2: Changes: General
  SGP/5: CNF — C and Fortran mixed programming
• FDA
  F.1: Programming
  G.1: Changes
  G.1.2: Changes: General
  G.1.6: Changes: Parameters and variables
  G.1.7: Changes: Data access routines
  G.1.8: Changes: Old data access routines
  G.6: Figaro 5.1-3 release
• FFT
  4.6: FFT
  G.5: Figaro 5.0 release
  G.6: Figaro 5.1-3 release
• FFTPACK
  4.6.1: FFT: Complex data structures
  G.5: Figaro 5.0 release
  SUN/194: PDA — Public Domain Algorithms’ library
• FIG
  G.1.2: Changes: General
  G.1.9: Changes: High-level subroutines
• FIGARO_PROG_[LNSU]
  2.5.3: Looking at an image: Adding colour
  4.10.1: Arc command: Arc line lists
  4.5: Fluxing
  4.9: Extinction
  G.1.2: Changes: General
  G.2: Figaro 3.1-1 news item
• FIO
  G.1.2: Changes: General
  SUN/143: FIO — Fortran I/O Routines
• FIT
  G.1.2: Changes: General
• FITS (data format)
  1: Introduction
  3.2.4: Internals of a data file: Foreign formats
  A.1: Commands: Input
  A.2: Commands: Output
  G.1: Changes
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.1.5: Changes: Un-ported applications
  G.1.11: Changes: Low-level subroutines
  G.3: Figaro 3.2 news item
  G.4: Figaro 3.2-3 news item
  G.6: Figaro 5.1-3 release
• FITS (extension to DST and NDF formats)
  3.2.6: Internals of a data file: Extensions
  3.2.7: in Specdre
  3.2.8: in Twodspec
  A.1: Commands: Input
• (F)PAR
  3.1: Parameters
  G.1.6: Changes: Parameters and variables
• Figaro
  SUN/86: FIGARO — A general data reduction system
  SUN/19: NDPROGS — N-D image manipulation programs (FIGARO)
• Figaro startup
  2.1: Unix setup
  2.2: Starting Figaro
• Fourier
  4.6: FFT
• false colour: see colour lookup table
• fig_ prefix
  2.2: Starting Figaro
  G.1.9: Changes: High-level subroutines
• figaro_link
  F.1: Programming
  G.5: Figaro 5.0 release
• file name
  3.1: Parameters
  3.2.1: Internals of a data file: HDS files
  4.3: Filters
  4.4: Spiketra
  4.5.2: Fluxing: Standard files
  4.7: S-distortion
  4.9: Extinction
  4.10.1: Arc command: Arc line lists
  4.10.2: Arc command: Other initial prompts
  4.13: Échelle reduction
  G.6: Figaro 5.1-3 release
• file search path
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
• filter
  4.3: Filters
  4.6.3: FFT: Going smoothly to zero at the ends
  4.6.7: FFT: Complex filters and data smoothing
  A.8: Commands: Manipulations
  A.18: Commands: Complex and FFT
• fit function to spectrum
  B.6: in Specdre
  C.2: in Twodspec
• flagged value: synonymous with bad value
• flat: see flat field
• flat field
  4.1: Flats
  A.7: Commands: Flats
  A.19: Commands: Infra-red
• flux (definition)
  4.5.9: Fluxing: The final step revisited
  4.8.5: Wavelengths: Linear wavelength scales —scrunching
• flux calibration
  4.4: Spiketra
  4.5: Fluxing
  A.16: Commands: Fluxing
  A.19: Commands: Infra-red
• flux density (definition)
  4.5.9: Fluxing: The final step revisited
  4.8.5: Wavelengths: Linear wavelength scales — scrunching
• foreign data formats
  1: Introduction
  3.2.4: Internals of a data file: Foreign formats
  3.2.5: Internals of a data file: DST format
  3.2.6: Internals of a data file: Extensions
  G.6: Figaro 5.1-3 release
  SUN/55: CONVERT — A format conversion package
  SSN/20: Adding format conversion facilities to the NDF data access library

G

• GEN
  G.1.2: Changes: General
  G.1.11: Changes: Low-level subroutines
  G.4: Figaro 3.2-3 news item
  G.5: Figaro 5.0 release
• GKD
  G.1.12: Changes: Other libraries
• GKS
  2.7: Paper copies
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.5: Figaro 5.0 release
  SUN/83: GKS — Graphical Kernel System
  SUN/113: ADAM graphics programmer’s guide
• GNS
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  SUN/57: GNS — Graphic workstation name service
• GWM
  G.1.2: Changes: General
  SUN/130: GWM — X graphics window manager
• GWM window
  2.4: Looking at a spectrum
  2.5: Looking at an image
  2.6: Image display in monochrome
  SUN/130: GWM — X graphics window manager
• Gauss
  4.12: Gauss command
  G.1.3: Changes: Ported applications
  G.3: Figaro 3.2 news item
  G.5: Figaro 5.0 release
• ghostscript (gs), ghostview
  2.7: Paper copies
• global parameter
  3.1: Parameters
  4.1.2: Flats: Spectral data
  4.7.4: S-distortion: Making do without an image display
  F.1: Programming
  G.1.6: Changes: Parameters and variables
• graphical user interface
  G.8: Figaro 5.1-6 release
• graphics
  2.1: Unix setup
  2.4: Looking at a spectrum
  2.5: Looking at an image
  2.6: Image display in monochrome B.3: Graphics in Specdre
• grey: see colour
• gs: see ghostscript

H

• HDS
  3.1: Parameters
  3.2: Internals of a data file
  A.12: Commands: Fudging
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.1.8: Changes: Old data access routines
  G.2: Figaro 3.1-1 news item
  G.4: Figaro 3.2-3 news item
  G.5: Figaro 5.0 release
  SUN/92: HDS — Hierarchical Data System programmer’s manual
  SUN/102: HDSTRACE — Listing HDS Data Files
• HELP
  SUN/124: HELP — Interactive help system
  SUN/175: MOSAIC — A hypertext help system
• HyperText-based help
  G.5: Figaro 5.0 release
  SUN/175: MOSAIC — A hypertext help system
• hard-copy (see also PostScript)
  2.7: Paper copies
  A.3: Commands: Display
• hds2dta
  G.1.2: Changes: General
• hdstrace
  3.1.5: Parameters: Syntax conflicts
  3.2: Internals of a data file
  4.8.2: Wavelength calibration: Wavelength arrays
  4.13.11: Échelle reduction: Scrunching
  G.6: Figaro 5.1-3 release
  SUN/102: HDSTRACE — HDS data file listing
• heliocentric
  4.11.2: Abline command: Running abline
• help
  2.3: Getting help
  3.1.3: Parameters: Prompted
  A.23: Commands: Miscellany
  G.1: Changes
  G.3: Figaro 3.2 news item
  G.5: Figaro 5.0 release
  SUN/124: HELP — Interactive help system
  SUN/175: MOSAIC — Hypertext help system

I

• ICL
  2.3: Getting help
  3.1.4: Parameters: Output
  G.4: Figaro 3.2-3 news item
  G.5: Figaro 5.0 release
  SG/4: ADAM — Starlink software environment
  SG/5: ICL — Interactive command language for ADAM
• IFL file
  G.1.6: Changes: Parameters and variables
  SUN/115: ADAM — Interface module reference manual
• IRAF (data format)
  1: Introduction
  3.2.4: Internals of a data file: Foreign formats
  G.6: Figaro 5.1-3 release
• in-situ
  G.4: Figaro 3.2-3 news item
  G.5: Figaro 5.0 release
• include file
  F.1: Programming
• interface file
  G.1.2: Changes: General
  G.1.6: Changes: Parameters and variables
  F.1: Programming
  SUN/115: ADAM — Interface module reference manual

J

• JT: see JTY
• JTY
  G.1.10: Changes: The JT-library: JTY

K

• KAPPA
  2.7: Paper copies G.1.2: Changes
  G.4: Figaro 3.2-3 news item
  G.5: Figaro 5.0 release
  SUN/95: KAPPA—Kernel application package

L

• LSR
  4.11.2: Abline command: Running abline
• LATEX
  2.7: Paper copies
  SUN/9: LATEX — A document preparation system
  SUN/12: LATEX — LATEX cookbook
  SUN/154: LTEX — Additional TEX and LATEX facilities
  SUN/155: FORMLOAD — LATEX form generator
• line analysis
  4.11: Abline command
  4.12: Gauss command
  A.10: Commands: Line fits
  B.6: in Specdre
  C.2: in Twodspec
• line integral
  4.11: Abline command
  4.12: Gauss command
• line list
  4.10.1: Arc command: Arc line lists
  4.13.10: Échelle reduction: Wavelength calibration
• line profile
  4.11: Abline command
  4.12: Gauss command
  A.10: Commands: Line fits
• line witdh
  4.11: Abline command
  4.12: Gauss command
• linear scrunching: see scrunching
• logarithmic scrunching: see scrunching
• login
  2.1: Unix setup
• lookup table: see colour lookup table

M

• MEM
  G.1.2: Changes: General
• MSG: see EMS
• MTPCKG
  G.1.2: Changes: General
• Mosaic: see HyperText-based help
• magic value: synonymous with bad value
• max: see parameter extrema
• mean (see also centre of gravity)
  4.1.1: Flats: Image data
  A.8: Commands: Manipulations
• median
  4.11.3: Abline command: Line parameter estimation
  A.8: Commands: Manipulations
• meta-character
  2.2: Starting Figaro
  3.1.5: Parameters: Syntax conflicts
• min: see parameter extrema
• monolith
  F.1: Programming
  G.4: Figaro 3.2-3 news item

N

• NAG
  4.6.1: FFT: Complex data structures
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.5: Figaro 5.0 release
  SUN/28: NAG — Mathematical Subroutine Library
• NDF
  3.2: Internals of a data file
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.1.8: Changes: Old data access routines
  G.3: Figaro 3.2 news item
  G.5: Figaro 5.0 release
  G.6: Figaro 5.1-3 release
  SUN/33: NDF — Subroutine library for accessing NDF data structures
  SSN/20: Adding format conversion to the NDF data access library
• NDF section
  3.2.3: Internals of a data file: NDF sections
  G.6: Figaro 5.1-3 release
  SUN/33: NDF — Subroutine library for accessing NDF data structures
• NDPROGS
  SUN/19: NDPROGS — N-D image manipulation programs (FIGARO)
• National Figaro
  G.1: Changes
• named parameter
  2.4: Looking at a spectrum
  3.1.2: Parameters: On the command line
• negated-name parameter
  3.1.2: Parameters: On the command line

O

• on-line help: see help
• origin
  3.2.2: Internals of a data file: NDF format
  SUN/33: NDF — Subroutine library for accessing NDF data structures
  SUN/95: KAPPA—Kernel application package

P

• PAR: see (A)PAR and (F)PAR
• PDA
  4.6.1: FFT: Complex data structures
  4.6.4: FFT: Taking the Fourier transform
  G.1.2: Changes: General
  G.1.3: Changes: Ported Applications
  G.5: Figaro 5.0 release
  SUN/194: PDA — Public Domain Algorithms’ library
• PGPLOT
  G.1.2: Changes: General
  G.1.3: Changes: Ported Applications
  G.1.6: Changes: Parameters and variables
  G.1.8: Changes: Old data access routines
  G.1.9: Changes: High-level subroutines
  G.5: Figaro 5.0 release
  SUN/15: PGPLOT — Graphics subroutine library
• PRIMDAT
  G.1.2: Changes: General
  G.1.8: Changes: Old data access routines
  SUN/39: PRIMDAT — Processing of primitive numerical data
• PSX
  G.1.2: Changes: General
  SUN/121: PSX — POSIX interface routines
• Portable Figaro: see Figaro
• PostScript
  2.7: Paper copies
  SUN/9: LATEX — A document preparation system
  SUN/131: Printing on a PostScript laser printer
  SUN/164: PSMERGE—Encapsulated PostScript file manipulation
  SUN/184: A2PS — ASCII to PostScript formatter
• Programmer’s Guide
  F.1: Programming
• par2ifl
  F.1: Programming
• parameter
  2.3: Getting help
  2.4: Looking at a spectrum
  2.6: Image display in monochrome
  2.5: Looking at an image
  B.2: Parameters in Specdre 3.1: Parameters
• parameter extrema
  2.5.2: Looking at an image: Advanced use of image
  3.1.3: Parameters: Prompted
  G.4: Figaro 3.2-3 news item
• parameter system (see also PAR)
  2.3: Getting help
  3.1: Parameters
• polynomial
  4.1.2: Flats: Spectral data
  4.4: Spiketra
  4.5: Fluxing
  4.6.8: FFT: Cross correlation
  4.7: S-distortion
  4.10: Arc command
  4.11.2: Abline command: Running abline
  4.12.2: Gauss command: Running the program
  4.13: Échelle reduction
  A.8: Commands: Manipulations
  A.16: Commands: Fluxing
• positional parameter
  3.1.2: Parameters: On the command line
• printed documentation
  2.3: Getting help
• procedure
  2.2: Starting Figaro
• programming
  F.1: Programming
• prompt
  2.5: Looking at an image
  3.1.3: Parameters: Prompted
• ps_l, ps_p, pscol_l, pscol_p
  2.7: Paper copies

Q

• quality
  3.2: Files
  G.5: Figaro 5.0 release
  G.5.1: Figaro 5.0-1 news item
• quotes, double quotes, back-quotes
  3.1.3: Parameters: Prompted
  3.1.5: Parameters: Syntax conflicts
  3.2.1: Internals of a data file: HDS files
  F.1: Programming

R

• RTL
  G.1.12: Changes: Other libraries
  G.5: Figaro 5.0 release
• redshift
  G.5: Figaro 5.0 release
• references
  B.8: for Specdre
• reset
  G.1.6: Changes: Parameters and variables
  3.1.2: Parameters: On the command line
• reverse axis
  4.1.2: Flats: Spectral data
  4.8.3: Wavelengths: The arc command
  A.6: Commands: Arthimetic
  A.8: Commands: Manipulations
• run-time help
  2.3: Getting help
  3.1.3: Parameters: Prompted

S

• S distortion
  4.7: S-distortion
  A.11: Commands: Distortion
• SGS
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
  G.5: Figaro 5.0 release
  SUN/85: SGS — Simple graphics system
  SUN/113: ADAM — graphics programmers guide
• Specdre
  A.21: Commands: Spectroscopy data reduction
  2.2: Demo
  3.2.7: Extension
  B.1: Introduction
  B.2: Parameters
  B.3: Graphics
  B.4: Slicing data sets
  B.5: Cube manipulation
  B.6: Spectral fits
  B.7: Arc spectrum axis calibration
  B.8: References
  G.1.3: Changes: Ported applications
  G.5: Figaro 5.0 release
• Starlink
  2.1: Unix setup
  SGP/7: Unix and Starlink
  SGP/31: The Starlink project
  SUN/1: Starlink software collection
  SUN/118: Starlink software on Unix
  SSN/66: Starlink software organization on Unix
• script: see procedure
• scrunching
  4.6.2: FFT: Creating a complex data structure
  4.8.5: Wavelengths: Linear wavelength scales — scrunching
  4.8.6: Wavelengths: Two-dimensional scrunching
  4.13: Échelle reduction
  A.4: Commands: Wavelengths
  A.8: Commands: Manipulations
  C.3: in Twodspec
  G.3: Figaro 3.2 news item
• section: see NDF section
• setorigin
  3.2.2: Internals of a data file: NDF format
  SUN/95: KAPPA—Kernel application package
• shell
  2.1: Unix setup
  2.2: Starting Figaro
  3.1.3: Parameters: Prompted
  3.1.5: Parameters: Syntax conflicts
  SUN/145: Unix — An introduction
• showme
  2.2: Starting Figaro
  2.3.3: Getting help via Mosaic
  G.6: Figaro 5.1-3 release
  SUN/188: HTX—Hypertext CrossReference Utilities
• slicing data sets
  A.14: Slicing through images and cubes B.4: in Specdre
• spiketrum
  4.3: Filters
  4.4: Spiketra
  4.5: Fluxing
  4.9: Extinction
  A.12: Commands: Fudging
  A.16: Commands: Fluxing
  A.17: Commands: Extinction
• spline
  4.1: Flats
  4.5: Fluxing
• spurious prompt
  2.5.2: Looking at tan image: Advanced use of ‘image’
  G.1.6: Changes: Parameters and variables
• standard (spectrophotometric standard star tables)
  4.1.2: Flats: Spectral data
  4.4: Spiketra
  4.5: Fluxing
  E.1: Spectrophotometric flux standards converted from SPICA format
  E.2: HST and new Oke spectrophotometric standard star flux tables
  G.5: Figaro 5.0 release
• startup
  2.1: Unix setup
  2.2: Starting Figaro
• syntax
  2.2: Starting Figaro
  3.1: Parameters
  3.2: Internals of a data file

T

• TIO
  G.1.2: Changes: General
• TVPCKG
  G.1.2: Changes: General
  G.1.3: Changes: Ported applications
• Tc shell: see shell
• TEX (see also LATEX)
  2.7: Paper copies
  SUN/93: TEX—A superior document preparation system
  SUN/154: LTEX — Additional TEX and LATEX facilities
• tcshrc
  2.1: Unix setup
• Twodspec
  A.22: Commands: Spectroscopy data reduction
  3.2.8: Extension
  C.1: Introduction
  C.2: Line Profile Analysis
  C.3: ARC2D—Wavelength Calibration
  C.5: Display Programs
  C.6: Removing Continua
  C.7: Getting 3-D Data into the Corr ect Form for FIBDISP or LONGSLIT
  C.8: Miscellaneous Programs
  C.9: Note on Menus
  C.10: The Defaults File

U

• Unix shell: see shell
• Unix startup
  2.1: Unix setup

V

• VARS (see also (F)PAR)
  G.1.2: Changes: General
• Voigt
  4.11.1: Abline command: Introduction
• variable
  F.1: Programming
  G.1.6: Changes: Parameters and variables
• variance (see also error)
  3.3: Error propagation
  3.2: Internals of a data file
  G.1.8: Changes: Old data access routines
• vector parameter
  3.1.2: Parameters: On the command line
• velocity
  4.13: Échelle reduction
  A.4: Commands: Wavelengths
  G.5: Figaro 5.0 release

W

• wavelength
  4.4: Spiketra
  4.5: Fluxing
  4.8: Wavelengths
  4.10: Arc command
  4.11: Abline command
  4.13: Échelle reduction
  A.4: Commands: Wavelengths
• wavelength calibration
  4.10: Arc command
  4.13: Échelle reduction
  4.8: Wavelengths
  B.7: in Specdre
  C.3: in Twodspec
  A.4: Commands: Wavelengths

X

• X display
  2.4: Looking at a spectrum
  2.5: Looking at an image
  
• Xadam
  G.8: Figaro 5.1-6 release
  
• Xdefaults
  2.4: Looking at a spectrum
  G.2: Figaro 3.1-1 news item
• x2w (see also xw)
  2.5: Looking at an image
  G.2: Figaro 3.1-1 news item
  SUN/57: GNS — Graphic workstation name service
  SUN/130: GWM — X graphics window manager
• x2windows: see x2w
• xdestroy: see xmake
• xdisplay
  2.4: Looking at a spectrum
  2.5: Looking at an image
  SUN/129: TPAU — The Peter Allan Utilities
• xhost
  2.4: Looking at a spectrum
• xmake
  2.4: Looking at a spectrum
  SUN/130: GWM — X graphics window manager
• xstart/xend
  G.1.6: Changes: Parameters and variables
  2.5: Looking at an image
• xw
  2.4: Looking at a spectrum
  2.5: Looking at an image
  G.2: Figaro 3.1-1 release
  SUN/57: GNS — Graphic workstation name service
  SUN/130: GWM — X graphics window manager
• xwindows: see xw
• xwindows2: see x2w

Y

• ystart/yend
  2.5: Looking at an image